Delivered from Laceys Creek, SEQ
Granny flats, delivered to Bundaberg.
Engineered, architect-designed, certification included, freighted from our SEQ yard. Kits flat-packed, or the finished home on a truck: all four products travel here, priced below.
Landed prices
Every model, every product, landed here.
Kit freight to Bundaberg: budget ~$1,150 flat-packed. Finished modules travel as wide loads: budget ~$1,650. All approx, inc GST, confirmed on your exact postcode before you pay anything.
| Model | Kit | Lock-up | Complete |
|---|---|---|---|
| Compact 4.816.3sqm · office / gym | ~$41,000 | ~$49,600 | ~$101,600 |
| Studio 6.020.4sqm · studio | ~$46,000 | ~$57,600 | ~$111,600 |
| Standard 8.428.6sqm · 1 bed | ~$61,000 | ~$77,600 | ~$141,600 |
| Wide 8.433.6sqm · 1 bed | ~$64,000 | ~$82,600 * | ~$146,600 * |
| Flex 10.843.2sqm · 1–2 bed | ~$73,000 | ~$96,600 * | ~$171,600 * |
| Family 13.554.0sqm · 2 bed | ~$95,000 | ~$123,600 * | ~$201,600 * |
* 4.0m wide models add a pilot vehicle to module transport, quoted per job. Cyclonic uplift of ~$7,500 applies on top for Region C sites. Compact and Studio kits often ship for less as part loads. Site works, footings and approvals are extra and priced before you commit: the main granny flat page has the whole number, or go deeper on the full breakdown.
Free first look
Will it fit your block?
Enter your address, pick a model, see it placed with setbacks. Two minutes, real planning data.
Before you order
The local facts.
Most compliant granny flats here need building approval, not a council DA. We confirm your council’s caps before you sign.
Rent it to anyone. The old family-only rule was removed in September 2022.
Budget ~$1,150 to Bundaberg, flat-packed on a standard truck, no pilots. Confirmed on your postcode.
Built or finished modules travel as wide loads: budget ~$1,650. 3.4m models need no pilot; 4.0m models do.
Region C site: frames, fixings and openings get engineered up. Budget ~$7,500 on any product; we confirm the exact figure before you sign.
Steel frame, standing seam Colorbond, non-combustible. Region C cyclonic engineering priced up front.
Where we deliver
3 areas here.
Roughly where the cyclonic wind region starts on this coast. That is a structural question for your certifier and it changes the engineering, so raise it with us at the enquiry rather than at the order.
Coastal, cyclonic region and salt exposed at the same time. All three feed into the specification before anything gets built.
Farming country inland of the coast, which usually puts it back in the non-cyclonic band. Your certifier confirms which side of the line your address sits.
Straight answers
Asked from Bundaberg.
How much is freight to Bundaberg?
Budget ~$1,150 for a flat-packed kit and ~$1,650 for a built or finished module, inc GST. Both are planning figures, confirmed on your exact postcode before you pay a dollar.
Can I get a finished granny flat delivered here?
Yes. The Complete home travels as a wide load: a one-bedroom Standard 8.4 lands at about ~$161,600 inc GST, cyclonic uplift on top. Your local builder or installer cranes it onto footings; our drawings and Form 15 give them everything they need.
Who builds it at my end?
You, under an owner-builder permit, or any licensed local builder. Every part arrives labelled against the drawings. Our supplier directory lists the trades and consultants we use ourselves.
What is not in these prices?
Site works, footings, connections and approvals. Unlike everyone else we put those numbers in writing before you commit: the whole-number view is on the main granny flat page.
One call, every number
Tell us your block. We tell you the whole price.
Model, freight to your postcode, site works, approvals. In writing, before you commit to anything.